SATA GmbH & Co. KG shall supply written notification with each SATAjet 3000 RP, SATAjet 3000 RP DIGITAL, SATAjet RP or SATAjet RP DIGITAL 2 spray gun sold or distributed for use within the jurisdiction of the South Coast Air Quality Management District that the spray gun is only approved for the application of coatings subject to Rule 1151.

This approval is only valid if the air pressure supplied to the SATAjet 3000 RP, SATAjet 3000 RP DIGITAL, SATAjet RP or SATAjet RP DIGITAL 2 spray guns is equal to or less than 35 psig. SATA GmbH & Co. KG shall supply written notification with each SATAjet 3000 RP, SATAjet 3000 RP DIGITAL, SATAjet RP or SATAjet RP DIGITAL 2 spray gun sold or distributed for use within the jurisdiction of the South Coast Air Quality Management District that the maximum air pressure supplied to the spray gun shall not exceed 35 psig.

SATA GmbH & Co. KG shall supply a Sata air micrometer with gauge 0/845 (product number 27771) modified to clearly identify the maximum allowable spray gun inlet air pressure with each SATAjet RP spray gun sold or distributed for use within the jurisdiction of the South Coast Air Quality Management District. The required modification shall provide a visual confirmation that the maximum allowed air pressure is 35 psig such as color coding the gauge to make the area of the gauge at and below 35 psig green and the area of the gauge above 35 psig red or other design approved by the South Coast Air Quality Management District. SATA GmbH & Co. KG shall supply written notification with each SATAjet 3000 RP, SATAjet RP spray gun sold or distributed for use within the jurisdiction of the South Coast Air Quality Management District that the Sata air micrometer with gauge 0/845 (product number 27771) or SATA adam (product number 130146) modified as described above shall be attached to the spray gun and be in good working condition whenever the spray gun is in operation. (shown on the picture on the right)

This approval is only valid if during actual operation the SATAjet 3000 RP, SATAjet RP spray gun is equipped with a properly operating Sata air micrometer with gauge as described in condition number 3.

SATA GmbH & Co. KG shall add a clearly visible permanent label specifying that the inlet air pressure shall not exceed 35 psig to all SATAjet RP DIGITAL 2 spray guns sold or distributed for use within the South Coast Air Quality Management District. (shown on the picture on the right)

This approval is only valid if during actual operation the SATAjet 3000 RP DIGITAL, SATAjet RP DIGITAL 2 spray gun is labeled as described in condition number 5.

This approval is only valid for the SATAjet 3000 RP / SATAjet 3000 RP DIGITAL 2, SATAjet RP and SATAjet RP DIGITAL 2 spray gun model tested.