SATA.com - Coarse surface structure during coating

Home

Car Refinishing

Painters and carpenters

Airbrush and Design

Spray Technology

Filtration Technology

Worker Health Protection

Rustproofing Equipment

Spray Gun Cleaning

Product Service

Application Tips

Trouble-Shooting

Short Manuals (Videos)

Air pressure adviser

Air consumption calculation

Spare Parts List

Paint Application Charts

Premium-Warranty - Registration

Sales Representatives

Specialized Dealers

Sources of Supply

SATA Conditions of Sales and Delivery

Paint manufacturers

Misc. Painting Products

Links for Painters

Germany

Air pressure adviser

	Coarse surface structure during coating ... Color shade changes and / or mottling increases Reason: Gun inlet pressure not constant *Cause of problem:* No pressure regulator connected Remedies: - Install suitable pressure regulator *Cause of problem:* Pressure regulator does not function or only irregularly Remedies: - Repair or replace pressure regulator *Cause of problem:* Filter cartridges are clogged Remedies: - Replace or clean filter cartridges *Cause of problem:* Diameter reduction due to teflon tape or rope pieces used for tightening fittings / connections Remedies: -Remove teflon tape - Ensure tight fit by means of sealing rings or liquid sealing agent, i.e. Loctite - In case a teflon tape is indispensable, apply thoroughly and avoid diameter reductions or loose pieces zurück

© 2002-2007 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany - Dan-Am Company, Spring Valley MN USA

All photos, logos and text of SATA products contained on this web site are the property of SATA GmbH & Co. KG.
DanAm is a fully independent company that is acting as the authorized importer and distributor for SATA branded products - and Dan-Am is responsible for the content shown on www.sata.com/USA .
DanAm has the sole responsibility for the contents of the website.

Other products referrenced within this website are property of Dan-Am Co.

Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.